Artisan Grasshopper
Graduated
3 components in Shanks › Graduated.
Graduated
Creates a graduated shank: stones shrinking from the centre stone towards the band, with prongs and cutters
Nickname: Graduated · Tab: Shanks › Graduated
Inputs
| Name | Nickname | Type | Access | Default | Description |
|---|---|---|---|---|---|
| Ring Diameter (optional) | Diameter | Number | item | — | Finger size diameter |
| Shank (optional) | Shank | Generic | item | — | Shank parameters (Graduated - Shank Params) |
| Gems (optional) | Gems | Generic | item | — | Gems parameters (Graduated - Gems Params) |
| Under Bezel Profile (optional) | UBezel | Generic | item | — | Bezel profile Asset for the under-bezel rail. Default: bezel section 017 |
| JSON (optional) | JSON | Text | item | — | JSON representation of a Graduated |
| Computation Mode | Mode | Text | item | RENDER | RENDER or MANUFACTURING |
Outputs
| Name | Nickname | Type | Access | Description |
|---|---|---|---|---|
| BReps | BReps | Brep | list | Shank Brep geometry |
| Prongs | Prongs | Brep | list | Prong Breps |
| Under Bezel | UBezel | Brep | list | Under-bezel Breps |
| Cutters | Cutters | Brep | list | Cutter Breps |
| Gems | Gems | Generic | list | Gem geometries |
| Meshes | Meshes | Geometry | list | Gem Meshes |
| Magnet Top | Magnet Top | Point | item | Top center of the bounding box |
| Magnet Bottom | Magnet Bot. | Point | item | Bottom center of the bounding box |
| Scheme | Scheme | Generic | item | Graduated scheme with reader-compatible keys |
| Semantic | Semantic | Text | item | Semantic text description of the graduated shank |
Graduated - Gems Params
Graduated gems, prongs, under-bezel, drill and cutters parameters
Nickname: Graduated Gems · Tab: Shanks › Graduated
Inputs
| Name | Nickname | Type | Access | Description |
|---|---|---|---|---|
| Enable (optional) | Enable | Boolean | item | Add the graduated gems |
| Gem Shape (optional) | Shape | Text | item | Gem shape (ROUND…) |
| Center Stone Size (optional) | CenterSize | Number | item | Centre stone size the shank opens for |
| Number Of Stones (optional) | Stones | Integer | item | Stones per side |
| Size Start (optional) | SizeStart | Number | item | Stone size nearest the centre stone |
| Size End (optional) | SizeEnd | Number | item | Stone size nearest the band |
| Distance (optional) | Distance | Number | item | Gap between adjacent stones |
| Lift (optional) | Lift | Number | item | Lift of the gems over the shank |
| Vertical (optional) | Vertical | Number | item | Vertical offset of the gems |
| Gem Inside (optional) | GemIn | Number | item | How far the gems sink into the metal |
| Gem Move In Z Start (optional) | GemZStart | Number | item | Z offset of the first gem |
| Gem Move In Z End (optional) | GemZEnd | Number | item | Z offset of the last gem |
| Inner Width (optional) | InnerW | Number | item | Seat width |
| Inner Height (optional) | InnerH | Number | item | Seat depth |
| Bright Cut (optional) | BrightCut | Number | item | Bright cut |
| Prongs Enable (optional) | ProngsOn | Boolean | item | Build the prongs |
| Type Prong (optional) | Prong | Text | item | NONE, SHARED or SCALLOPED |
| Automatic Prong Diameter (optional) | AutoProngD | Boolean | item | Derive the prong diameter from the gem size |
| Prong Diameter Start (optional) | ProngDStart | Number | item | Prong diameter at the centre end |
| Prong Diameter End (optional) | ProngDEnd | Number | item | Prong diameter at the band end |
| Prong Height Start (optional) | ProngHStart | Number | item | Prong height at the centre end |
| Prong Height End (optional) | ProngHEnd | Number | item | Prong height at the band end |
| Prong Over Girdle Start (optional) | ProngOGStart | Number | item | Prong rise over the girdle at the centre end |
| Prong Over Girdle End (optional) | ProngOGEnd | Number | item | Prong rise over the girdle at the band end |
| Prong Separation Start (optional) | ProngSepStart | Number | item | Prong separation at the centre end |
| Prong Separation End (optional) | ProngSepEnd | Number | item | Prong separation at the band end |
| Prong Move In Z (optional) | ProngZ | Number | item | Prong Z offset |
| Prong Grow (optional) | ProngGrow | Number | item | Prong growth along the run |
| Prong Min Diameter (optional) | ProngMinD | Number | item | Minimum prong diameter |
| End Prong Count (optional) | EndProngs | Integer | item | Prongs at the end of the run |
| Prong Cut By Ring Size (optional) | ProngCut | Boolean | item | Cut the prongs by the finger cylinder |
| Under Bezel Enable (optional) | UBezel | Boolean | item | Add the under-bezel rail |
| Under Bezel Width (optional) | UBezelW | Number | item | Radial width of the under-bezel profile |
| Under Bezel Height (optional) | UBezelH | Number | item | Under-bezel height (0 = drop to the finger curve) |
| Under Bezel Over Girdle (optional) | UBezelOG | Number | item | Under-bezel rise over the girdle |
| Under Bezel Girdle Width (optional) | UBezelGW | Number | item | Under-bezel top width |
| Under Bezel Bottom Width (optional) | UBezelBW | Number | item | Under-bezel bottom width |
| Under Bezel Gem Inside (optional) | UBezelIn | Number | item | Under-bezel rail offset into the stone |
| Drill Type (optional) | Drill | Text | item | NONE, ROUND or SQUARE |
| Drill Width (optional) | DrillW | Number | item | Drill width |
| Drill Height (optional) | DrillH | Number | item | Drill height |
| Drill Allow Intersection (optional) | DrillX | Boolean | item | Allow the drills to intersect |
| Cutters Enable (optional) | CutOn | Boolean | item | Build the cutters between gems |
| Cutters Start Height (optional) | CutSH | Number | item | Cutter start height |
| Cutters Start Width (optional) | CutSW | Number | item | Cutter start width |
| Cutters End Height (optional) | CutEH | Number | item | Cutter end height |
| Cutters End Width (optional) | CutEW | Number | item | Cutter end width |
| Cutters Length (optional) | CutL | Number | item | Cutter length |
| V Cutters Enable (optional) | VCutOn | Boolean | item | Build the V cutters between gems |
| V Cutters Start Height (optional) | VCutSH | Number | item | V cutter start height |
| V Cutters Start Width (optional) | VCutSW | Number | item | V cutter start width |
| V Cutters End Height (optional) | VCutEH | Number | item | V cutter end height |
| V Cutters End Width (optional) | VCutEW | Number | item | V cutter end width |
| V Cutters Length (optional) | VCutL | Number | item | V cutter length |
| Boolean Cutters (optional) | BoolCut | Boolean | item | Subtract the cutters from the shank |
| Extension For Manufacturing (optional) | MfgExt | Number | item | Prong extension for manufacturing |
| Connector (optional) | Connector | Generic | item | Dictionary from a Reader Connector output (base values). Individual inputs override. |
Outputs
| Name | Nickname | Type | Access | Description |
|---|---|---|---|---|
| Gems Params | Gems | Generic | item | Dictionary of parameters (the Connector values plus the connected inputs) |
Graduated - Shank Params
Graduated shank section parameters
Nickname: Graduated Shank · Tab: Shanks › Graduated
Inputs
| Name | Nickname | Type | Access | Description |
|---|---|---|---|---|
| Profile (optional) | Profile | Generic | item | Ring profile Asset for both sections. Default: the default ring profile |
| Top Width (optional) | TopW | Number | item | Section width at the top (next to the gems) |
| Top Height (optional) | TopH | Number | item | Section height at the top |
| Top Type (optional) | TopType | Text | item | Top section type (COMFORT, FLAT…) |
| Top Thickness (optional) | TopT | Number | item | Top section thickness |
| Top Comfort (optional) | TopC | Number | item | Top section comfort rounding |
| Top Rotation (optional) | TopRot | Number | item | Top section rotation |
| Top Displacement (optional) | TopDisp | Number | item | Top section displacement |
| Bottom Enable (optional) | BotOn | Boolean | item | Use a different section at the bottom |
| Bottom Width (optional) | BotW | Number | item | Section width at the bottom |
| Bottom Height (optional) | BotH | Number | item | Section height at the bottom |
| Bottom Type (optional) | BotType | Text | item | Bottom section type (COMFORT, FLAT…) |
| Bottom Thickness (optional) | BotT | Number | item | Bottom section thickness |
| Bottom Comfort (optional) | BotC | Number | item | Bottom section comfort rounding |
| Bottom Rotation (optional) | BotRot | Number | item | Bottom section rotation |
| Bottom Displacement (optional) | BotDisp | Number | item | Bottom section displacement |
| Cut Bumping (optional) | Bumping | Number | item | Bumping of the cut under the gems |
| Opening Margin (optional) | Margin | Number | item | Margin of the opening for the centre stone |
| Bridge (optional) | Bridge | Boolean | item | Internal bridge under the opening, Cathedral-style: an arc of metal on the finger curve from cap to cap (off by default) |
| Bridge Width (optional) | BridgeW | Number | item | Bridge width along the ring axis |
| Bridge Thickness (optional) | BridgeT | Number | item | Bridge radial thickness, outwards from the finger curve |
| Bridge Diameter (optional) | BridgeD | Number | item | Diameter of the round plate under the centre stone; 0 = plain arc |
| Bridge Fillet (optional) | BridgeF | Number | item | Fillet of the bridge edges; 0 = sharp |
| Connector (optional) | Connector | Generic | item | Dictionary from a Reader Connector output (base values). Individual inputs override. |
Outputs
| Name | Nickname | Type | Access | Description |
|---|---|---|---|---|
| Shank Params | Shank | Generic | item | Dictionary of parameters (the Connector values plus the connected inputs) |