Gemsets

Build gem settings, trilogy mounts, cutters and prongs with RhinoArtisan. The tools below follow the order of the Gem Settings toolbar on Mac.

Open Gem Settings from the Main Toolbar, or enter the command shown on each tool’s help page in Rhino’s command line.

Settings

• Peg HeadA head on a peg, ready to drop into a mount.
• BasketThe open cage under the stone.
• Advanced BasketThe same with every dimension exposed.
• BezelA rim of metal around the stone.
• Advanced BezelThe same with every dimension exposed.
• HaloA ring of small stones around the centre one.
• ClusterA group of stones set as one head.
• Hidden HaloA halo under the centre stone, seen only from the side.
• MartiniThe conical martini-glass setting.
• TulipThe tulip-shaped head.
• TrellisCrossing prongs that weave under the stone.
• ChannelStones held between two walls of metal.
• AzureThe decorative openings under the stones.

Trilogy

• Trilogy TrellisA woven trellis of crossing prongs around all three stones.
• Trilogy HaloA halo of small stones around each of the three.
• Trilogy BezelsEach of the three stones wrapped in its own bezel.
• Trilogy East-WestA basket of prongs and rails under each of the three.
• Trilogy IndividualA tulip head for the centre, a rail under each side stone.

Cutters and prongs

• CuttersThe seats and holes for each stone.
• Micro SettingThe cutter geometry for micro-set stones.
• Dynamic ProngsProngs that follow the stones as they move.
• Custom ProngsReplace the generated prongs with a prong you modelled.

Prong axis

• Prong AxisProng centrelines only, to plan placement or sweep your own.